SAGE SOLUTIONS repairs all furnace makes and models for both commercial buildings and residential homes. Best of all, we don't charge emergency rates for our after-hour service.
Only $165 to have your furnace cleaned. Our cleaning and maintenance plan will help ensure that your furnace does not become an emergency. Our service includes the following:
Consider that just 1/8" of dirt on the furnace blower blade will change the pitch of your blower blades and decrease your air flow efficiency by 25-40%. SAGE SOLUTIONS will clean your blades with 300 pounds of pressure. This is a service worth it's weight in gold.
Just $185 to certify and clean your furnace. Certifying your furnace means we ensure that there are no cracks in the furnace heat exchanger that could leak carbon monoxide. There are other advantages to being proactive when it comes to maintaining your furnace. Not only is it a safety issue for you and your family; but, it also helps ensure that your furnace does not quit at an inopportune time.
Most furnaces fail after-hours....not true! You simply notice the failure when you arrive home in the evening. Your go-to response is to immediately call a service company to get the furnace repaired before your pipes freeze. Most companies then charge an exorbitant rate to complete an emergency repair and you begrudgingly pay the bill. This is one reason SAGE SOLUTIONS' offer is such a great deal...let us do now what someone else will eventually charge you in an emergency at emergency rates.
A certification is a formal inspection by a qualified HVAC technician documenting the current condition of your furnace. The process involves checking the heat exchanger for cracks. A cracked heat exchanger is not only an expensive repair; but, can also create an extremely dangerous situation for you and your family. After the certification, SAGE SOLUTIONS will provide a written report testifying to the condition of the heat exchanger. A furnace certification is typically requested when buying a new home.
Copyright © sagequalitysolutions.com 2022 all rights reserved.
Sprinkler System Activation/Start-up | $125 up to 8 zones, additional zones $5 each + any parts and installation |
Sprinkler System Tune-up | service call plus parts and labor @ $80/Hour |
Sprinkler System Repairs | Service Call plus the repair activity shown below |
Sprinkler System Winterization | $90 up to eight zones, additional zones $5 each |
Service Call All repair visits include the service call charge plus the repair activity cost as shown below. | $85 |
Replace pop-up spray head & nozzle | $30 |
Replace rotor sprinkler head | $50 |
Replace Maxi-Paw impact sprinkler head | $95 |
Raise or straighten a spray head | $12 |
Replace Spray Nozzle | $7 |
Replace Febco Backflow Parts | $95 |
Replace Watts/Wilkins backflow parts | $135 |
Replace backflow preventer | $395 |
Replace RP double check backflow | $750 |
Replace backflow testcock | $45 |
Replace ball valve | $205 |
Cooper Repair, Break in Pipe | $200 |
Rebuild manifold assembly 4 valves or less. | $950 |
Each additional manifold Valve | $100 |
Replace one control valve | $400 |
Each additional replaced control valve | $100 |
Replace control valve parts | $95 |
Replace control valve solenoid | $95 |
Diagnose Electrical Issues | $80/hour |
Locate valve box, minimum 1 hour | $80/hour |
4 station control clock with installation | $225 |
6 station control clock with installation | $250 |
8 station control clock with installation | $275 |
12 station control clock with installation | $475 |
Wi-Fi module for control clock with installation and programming | $175 |
Rain sensor for control clock with installation | $175 |
Cap A Sprinkler Head | $30 |
Repair plastic pipe leak | $80/hour + parts |
Install micro spray nozzle. | $2 |
Repair plastic pipe leak | $80/hour plus parts |
Would you like to schedule an appointment? Contact Us Now